Search Results

MRI EQUIPMENTS Our MRI systems are re-certified prior to shipment, which means the manufacturer will accept it for coverage under its own warranty or service plan We use factory-trained engineers for inspection, de-installation, refurbishing/remanufacturing, repair, and installation We are registered with the FDA as a medical device company. This means we must comply with strict standards for every piece of MRI equipment we buy, refurbish or resell Every MRI scanner is accredited through the American College of Radiation Accreditation for Magnetic Resonance Imaging Our process follows our strict standards as well as FDA guidelines, re-certification requirements, and protocols for accreditation from the American College of Radiology (ACR). This can be a painstaking process for us, simply because sometimes we'll never get past Step 1 with an MRI machine. If it doesn't pass our initial rigorous inspection, we walk away from that system, no matter good the price looks. Is it a waste of time? Absolutely not. While it's expensive for us to inspect a MRI system, we reject MRI systems with a problematic history or do not meet our strict standards and requirements. Often it means we're passing on a bargain-priced machine, but we know that eventually the cost and frustration of down-time and repair costs will negate any possible savings. Unfortunately these machines find their way on the market and some dealer is making a lot of money... and the customer is losing money. That's not who we are. Here's what we do: Inspection: Every MRI unit we consider for purchase goes through a rigorous pre-purchase inspection. This is a key step... a historically problematic MRI system will likely cause headaches in the future. Sometimes today's "bargain" is tomorrow's "wish I hadn't done that". De-installation: Manufacturer-trained engineers carefully remove the system from its old site and prepare it for its new life elsewhere. The MRI machine is disassembled down to its component level and fully tested. Each component is accepted, repaired, or replaced to meet manufacturer's specifications. Re-certification: The machine is then re-certified to be accepted by the manufacturer for warranty coverage. Financing: Our leasing experts can help you get the best rates quickly and easily. Logistics: The MRI is carefully packaged and shipped to its destination, installed, and tested. RF Shielding/Magnetic Shielding: The room and facility are inspected, tested, and ensured for proper Magnetic and RF shielding Rigging: Proper rigging of the magnet is performed by an experienced rigging professional Accreditation: Technicians have the MRI accredited by the ACR. Applications and Training: Applications specialists train the facility's technicians on their new MRI imaging machine. Warranty: Every STF MRI machine is fully warranted and covered by STF . Extended Service Coverage: STF offers significant savings over the manufacturer on service contracts. However, because the MRI has been re-certified, the manufacturer will also offer its own extended service contracts. The choice is yours. GE Signa 3.0T Magnetom Avanto Magnetom Trio GE Signa HDx 1.5T GE Discovery MR450 1.5T

Get in Touch First Name Last Name Email Message Send Thanks for submitting! Contact Us Address 3300 Sunset Blvd, Los Angeles, CA 90026, United States Email Medtech@consultant.com

Anesthesia Machines Star Tech Fusion provides a wide selection of new anesthesia machines and professionally refurbished anesthesia machines as well as used anesthesia machines. The anesthesia machines have advanced functionalities and features that will help you work more efficiently and effectively. Standard features include an ergonomic design and a user-friendly operation. You can create an anesthesia workstation that is tailored to your requirements so you can concentrate on patient care. Anesthesia machines are equipped with a variety of technologies, including smart software applications, useful features, decision-support tools, flexibility, and other helpful features. This innovative solution, which is complemented by our patient monitoring solutions brings patient-relevant information to the point-of-care and ICU-quality ventilation therapy into the OR. You can find the best anesthesia station to provide individualized treatment across a wide range of patient acuities. This may reduce postoperative complications and speed up preoperative workflows. You can combine patient safety with financial and operational goals using our anesthesia delivery systems. This allows you to adapt to changing healthcare issues by using innovative decision support tools. Types of Anesthesia Machines for Patient Care Integrated Systems MRI-Compatible Portable Systems Small Footprint Proprietary Components Drager Fabius OS Drager Perseus A500 Drager Fabius MRI GE Aisys CS2 GE Datex-Ohmeda Aestiva MRI

Quality Medical Equipment Sales and Anesthesia Services • OR Equipment Supplier • Anesthesia Experts • Reliable Service and Repair • Veterinary Products Division • Available Nationwide Anesthesia Machines CT Scanners MRI Equipment A Global & Small-Scale Provider We hold ourselves up to the highest of standards, and have been part of this industry since 2000. We have an immense amount of knowledge from years of experience as a Medical Equipment Manufacturer, and continue to expand our practices each and every day. We supply many local and global companies with a variety of innovative products, created with the greatest degree of precision and care. 09 09 09 09 Excellence in service since 2014 100+ Customers Served 500+ installations in over 20 countries Reliable And Trusted WHAT PEOPLE SAY Alex M.C Fast, professional, and completely hassle-free. Everything was explained clearly, and the system was up and running faster than we expected. Rhonda Carter They double checked every connection and made sure I understood how to use the new equipment. The setup has been working flawlessly since day one. Olga Sergei The process couldn’t have been easier. The technician respected my space, handled everything with care, and verified that every component was working at peak performance. Tailored Services Our team members work closely with hospitals and related healthcare providers in order to help them research and choose equipment and/or services based on their specific needs. In addition, we provide support long after the installation. At Heartland, we pride ourselves on the level of care given to Service Contracts, Preventive Maintenance, and Repair. Anesthesia Machines CT Scanners MRI Equipment Service Inquiry Fill in the form below to let us know which service you're interested in and how we can help - we'll get back to you as soon as possible. First name* Last name* Phone number* Add a message or tell us more about what you need Send Request

CT Scanners WE DEAL WITH THE BEST BRANDS STF is proud to buy, repair, remanufacture, and sell high quality CT Scanners from the top manufacturers with the following available slice counts: General Electric 4, 8, 16, and 64 slice Philips 6, 16, 40, and 64 slice Siemens 4, 6, 16, and 64 slice Toshiba 4, 16, and 64 slice TURNKEY SOLUTION, OR JUST THE CT? Your choice: We can do it all... or a la carte. From a simple inspection to managing the entire process, STF manages each step with expert precision and professionalism. Choose to reduce your overall cost and risk by choosing a turnkey solution, or choose just a few of our many available services, such as: Inspection De-installation Site Planning Buildout Logistics Service Warranty Repair Parts replacement Applications & Training Remanufacturing/Refurbishing Re-Certification Accreditation CHECK, DOUBLE-CHECK, TRIPLE-CHECK Our process is born from our strict standards as well as FDA guidelines, re-certification requirements, and protocols for accreditation from the American College of Radiology (ACR). It's because of these standards and requirements that some machines never get past step 1. Beyond that crucial step, every measure is taken to ensure the equipment is upgraded at each successive step. While it's expensive for us to inspect a CT Scanner, we always reject scanners with a problematic history or do not meet our strict standards and requirements. These machines often come at a bargain price, but eventually the cost and frustration of down-time and repair costs will ultimately negate any possible savings up-front for our valued customers. We know these machines find their way on the market at bargain prices, but our reputation is more important to us than making a few extra dollars. Inspection: Every CT unit we consider for purchase goes through a rigorous pre-purchase inspection. This is a key step... a historically problematic CT scanner will likely cause headaches in the future. Sometimes today's "bargain" is tomorrow's "wish I hadn't done that". We don't want someone else's lemon nor do we want to pass it to our customers. De-installation: Manufacturer-trained engineers carefully remove the system from its old site and prepare it for its new life elsewhere. Remanufacturing/Refurbishing: The CT scanner is disassembled down to its component level and fully tested. Each component is accepted, repaired, or replaced to meet manufacturer's specifications. Re-certification: The machine is then re-certified to be accepted by the manufacturer for warranty coverage. Financing: Talk to our leasing specialists on getting the best rates quickly and easily. Logistics: The CT Scanner is carefully packaged and shipped to its destination, installed, and tested. Accreditation: Technicians have the CT Scanner accredited by the ACR. Applications and Training: Applications specialists train the facility's technicians on their new CT Scanner. Warranty: Every CT Scanner is fully warranted and covered by MedTech. Extended Service Coverage: MedTech offers significant savings over the manufacturer on service contracts. However, because the CT scanner has been re-certified, the manufacturer will also offer its own extended service contracts. The choice is yours. Canon Aquilion One Ingenuity CT Definition 128 (Dual Source) Somatom Definition 64 GE Discovery CT750 HD

Drager Perseus A500 Description Features: Ventilation in the operating room: The Perseus A500’s TurboVent 2 ventilation technology supports ICU-quality ventilation across all patient applications. Airway pressure release ventilation (APRV) and Volume AutoFlow allow you to continue protective ventilation therapy in the operating room. The anesthesia machine’s breathing system layout enables patients to breath spontaneously and eases gas concentration changes to assist in managing cases with certainty. Low- and minimal-flow anesthesia tools: The low-and minimal-flow anesthesia tools on the Perseus A500 are designed to enhance the clinical, environmental and financial impact of anesthesia delivery. Its Low Flow Wizard guides clinicians to the lowest fresh gas flow possible so that anesthetic agent consumption and costs are minimized. The heated breathing system of the anesthesia machine is designed to reduce condensation, Enhanced workplace ergonomics: The Perseus A500 offers a generous, well-lit workspace for organization and documentation. With various shelving options, hooks, and drawers, there is ample room. Castor cable deflectors and the anesthesia machine cable channels help you keep up a clutter-free workspace. The recently designed breathing system of the Perseus A500 could be disassembled and reassembled in just a few easy steps.

Medical Equipment Planning Services When outfitting new constructions, expansions, or remodels, capital equipment medical devices is an essential part of the design. These items are those that aren’t routinely bought on a regular basis. Our direct-to-site delivery services and capital equipment experts can help you to efficiently procure, deliver, and install such items. We can help you with all aspects of your project. From the initial quote, to the completion of the purchase, tracking your items and receiving them, to receiving your items, to warehousing and staging, assembly, delivery and installation. We are the capital equipment medical devices experts and can simplify the process for you. Capital equipment medical devices generally refers to any equipment that costs more than a predetermined amount. This equipment may be classified as items bought at over $10,000 by a larger medical setting. You can use capital equipment as a standalone or as a supplement. They can be used alone or in combination with other equipment to perform a specific function. Software, for example, may be capitalized if it is purchased with capital hardware equipment and then physically installed in it. Anesthesia Machines CT Scanners MRI Equipment Medical Equipment Planning Services When outfitting new constructions, expansions, or remodels, capital equipment medical devices is an essential part of the design. These items are those that aren’t routinely bought on a regular basis. Our direct-to-site delivery services and capital equipment experts can help you to efficiently procure, deliver, and install such items. We can help you with all aspects of your project. From the initial quote, to the completion of the purchase, tracking your items and receiving them, to receiving your items, to warehousing and staging, assembly, delivery and installation. We are the capital equipment medical devices experts and can simplify the process for you. Get a Quote First Name Last Name Email Send Thanks for submitting!

I want to join the webinar, Sign me up! First Name Last Name Email Message Submit Thanks for submitting!

Who We Are STF was opened in 2014 by expert technician. Their business model was to provide competent, reliable service and repair of capital medical machines. STF techs were so often asked by their service customers about which equipment was reliable to purchase that they made the natural progression to refurbish and sell equipment; eventually branching out into more and more types of equipment as their experience grew. Whether you are looking to purchase an MRI or CT scanner, or need a full turn-key installation of both, we look forward to the opportunity to serve those needs. Post installation warranty and annual service contracts are also available and are an important part of the ongoing support we offer our clients. Our equipment capabilities range from single replacement devices to the complete outfitting of surgery centers and other medical facilities. At the heart of things, we remain a service company. We aren’t the largest but we may be the best. Jason M. Moore Director/CEO Jason M. Moore is the Ceo and director of STF . He founded MedTech in 2014, after working as a neurologist in the US military for several years. He went on to gain a number of medical equipment qualifications, including Medical Gas Maintenance Personnel. He also finished various courses that needed a final test, such as the IPMM/SCR seminar, technical service basic and advanced seminars, Fabius GS seminar, Narkomed Mobile, and so on. He also achieved the NAD Service Classification of Senior Technical Representative. Subscribe to get exclusive updates Email* Join Our Mailing List I want to subscribe to your mailing list.

OUR INSTALLATION AND MAINTENANCE PROCESS You can be an expert or have zero experience with MRI machines and CT systems. It really doesn't matter because we will never drop off an MRI or CT scanner and say, "Here you go! Have fun!" Instead, we provide one-on-one technical assistance to ensure that, by the time we leave, you can start scanning patients and produce superb results. CT SCANNER INSTALLATION PR EP Purchasing a CT scanner is a cause for celebration and shouldn’t be a cause for more stress or work. As such, we feature two basic options when preparing the installation. You can essentially choose your level of involvement with the options below. Option #1: We do almost all the preparation work. We come to your site and confirm the necessary logistics of the scanner's installation, including: Measuring and verifying the square footage of the planned CT exam roo m Measuring doorways, hallways, etc, to ensure the system can be transported to the exam room Making sure the room has the proper electricity available Verifying the exam room's temperature and humidity levels Coordinating any necessary modifications if the exam room is not optimized for your new CT scanner In the above situation, you pay a little extra but avoid the headaches involved with the installation's management. Option #2: We guide you through the upfront logistics to verify your space is optimized for the device’s installation, then we deliver it. Making full use of emails and phone calls, we provide step-by-step instructions to ensure that the system's operating requirements correspond with your site (see bullet points above). If the CT exam room lacks certain requirements, we'll provide easy-to-follow instructions to get the room fully prepped. MRI MACHINE INSTALLATION PREP The process of preparing the installation of an MRI machine at your facility is very similar to the steps we outlined above for CT scanners. However, MRI exam rooms need MRI shielding in order to function properly and safely. As such, for an MRI installation, we will need to inspect your exam room’s current MRI shielding to ensure it is still high quality. If your facility does not already have an MRI shielded exam room, don’t worry! Our team can help arrange MRI shielding installation in any room at your facility. The MRI shielding we provide is the most robust in the industry; we offer: Modular enclosures capable of fitting almost any space Expandable enclosures for future expansions Various interior finishes We’ll arrange the whole shielding process, including enclosure installation, power and telephone filters, shielded doors, cryogen RF waveguide pipes, copper ground plates, and much more!

Visit Our Blog Medical Catalogue SAVE OUR PLANET Privacy Policy of MedTech Information on opting out of interest-based advertising In addition to any opt-out feature provided by any of the services listed in this document, Users may follow the instructions provided by YourOnlineChoices (EU), the Network Advertising Initiative (US) and the Digital Advertising Alliance (US), DAAC (Canada), DDAI (Japan) or other similar initiatives. Such initiatives allow Users to select their tracking preferences for most of the advertising tools. The Owner thus recommends that Users make use of these resources in addition to the information provided in this document. The Digital Advertising Alliance offers an application called AppChoices that helps Users to control interest-based advertising on mobile apps. Users may also opt out of certain advertising features through applicable device settings, such as the device advertising settings for mobile phones or ads settings in general.

Drager Fabius MRI Description Features: Compact design, smart ergonomics The Fabius MRI has a streamlined breathing system, COSY 2.6 that can be mounted on the left or right hand side of the unit, depending on the room layout. Mounted on a short, 8″ arm to provide positioning flexibility, it simplifies usage in a frequently cramped MRI environment. The Fabius MRI also provides you the option of working with the Dräger CLIC disposable soda lime absorber canister. Broad array of therapy modes The Fabius® MRI offers you access to a broad range of ventilation modes – including volume, pressure, pressure support and SIMV/PS – providing a maximum level of respiratory care, whatever the patient acuity level. Electronic ventilator The Dräger Fabius® MRI includes a servo-controlled, piston ventilator which needs no push gas. The piston offers accurate volume delivery, and is capable of providing higher inspiratory flows than the conventional bellows ventilator. Fully certified for MRI Specifically designed for use in magnetic surroundings, the Dräger Fabius® MRI is accredited for field strengths of up to 40 mTesla or even 400 Gauss. This provides dependable ventilation with 1.5 as well as 3 Tesla MRI systems. High reliability alerts The Fabius MRI is equipped with highly noticeable repeater LED optical alarms that alert clinicians to changing patient conditions. Standard working philosophy Since it utilizes Dräger’s uniform user interface, Fabius MRI is fast and simple to learn. All relevant information is displayed on a single, higher resolution LCD color display (6.5 inch diagonal).